How to Factory Reset Your Station P1 Powered by ScreenCloud OS

Avatar
by Jennifer Hardegen
Follow

This article will go through how to perform a factory reset on your Station P1 device powered by ScreenCloud OS. Factory resetting your device is important if you would like to reconfigure your Station P1 to operate on a different network setting, or perhaps you even want to add in proxy settings.

 

To learn how to factory reset your Station P1, follow along with the steps below.

Screen_Shot_2564-03-07_at_23.20.58.png

 

How to Factory Reset Your Station P1 Powered by ScreenCloud OS

 

1.1. To begin factory resetting your Station P1, first locate a keyboard and mouse, and connect it to your Station P1.

 

1.2. Next, power off and on your device. As your Station P1 starts to reboot, select "Ctrl + Alt + R" by pressing down once on all keys on your keyboard simultaneously.

After following the steps above, your Station P1 will reboot into the "ScreenCloudOS Recovery" mode.

Screen_Shot_2564-03-30_at_11.09.39.png

 

1.3. Once you are in the "ScreenCloudOS Recovery" mode, select the first option "Clear User Data" and then select "OK" by pressing enter on your keyboard. 

Screen_Shot_2564-03-30_at_11.13.30.png

 

1.4. On the next screen, you will be asked if you are sure you want to clear the user data, select "Yes" by pressing enter on your keyboard. Your Station P1 will automatically start clearing the user data.

Screen_Shot_2564-03-30_at_11.16.19.png

 

1.5. After your Station P1 has finished clearing the user data, it will show you the "ScreenCloudOS recovery" mode options again. Next, use your keyboard to navigate to the "Clear Environment" option, and select "OK" by pressing enter on your keyboard.

Screen_Shot_2564-03-30_at_11.34.23.png

 

1.6. Once again, select "Yes" by pressing enter on your keyboard. Your Station P1 will automatically start clearing the environment. 

Screen_Shot_2564-03-30_at_11.32.54.png

 

1.7. After your Station P1 has finished clearing the environment, select "Reboot" and then select "OK" by pressing enter on your keyboard to exit the "ScreenCloud OS Recovery" mode and reboot the ScreenCloud app.

Screen_Shot_2564-03-30_at_11.37.14.png

 

1.8. Your device will reboot to its original factory reset state, at this point you can begin re-provisioning your Station P1. To re-provision, your device, follow along with this article here to Set up your Station P1 with ScreenCloud.

 

If you have any additional questions on how to factory reset your Station P1 powered by ScreenCloud OS, or any other questions or feedback about ScreenCloud, feel free to reach out to our support team at support@screencloud.com or give us a call at our toll-free support line at +18885575335

Comments

0 comments
Please sign in to leave a comment.